White Industries T11 hubs mated to Stan’s Alpha 400 rims is a combination I’ve built (and ridden) in more than one incarnation. This set is put together with Sapim Laser spokes in the front and rear non-drive side, Sapim Race rounding out the rear. That puts total weight a hair over 1500 grams while remaining stiff enough for the rider. These wheels are setup tubeless with Stan’s tape and valves supporting Schwalbe Pro One tires in 700×28. A perfect combination top to bottom.
This build used DT Competitions to lace Hope Pro4 hubs to WTB Asym rims, in this case a 650b (27.5″) wheelset. Asymmetric rims aren’t strictly new but the number and variety of models on the market is improving. The idea is simple — spokes land to one side of the rim instead of the centre. This counteracts the natural asymmetry in rear wheels, resulting in more even tension. I’m a fan.
To cope with wet coastal winters I’m building a spirited road bike that takes fenders. These are the wheels I built for myself: White Industries T11 hubs laced to Stan’s Alpha 400 rims; Sapim D-Light spokes on the front and a blend of Sapim Race and Sapim Laser on the rear. 1518 grams total.
These wheels will run tubeless with Schwalbe One tires along with the full stack of Stan’s tape, valves and sealant. The cassette is Dura-Ace 9000 and the skewers are Dura-Ace 7900.
RECENT TWEETS →
- RT @BicyclingMag: "When I cross the finish line, people seem stunned." https://t.co/CQTtCBepUs11 days ago
- RT @bikesnobnyc: New @outsidemagazine column about how you should try building a wheel this winter instead of Zwifting. (Even though I kno…49 days ago
- Server going down for upgrades today. The wheelbuilding webapps and online store are both affected. Will be back in action later today.55 days ago